Filament Shelf using dowels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a better way to store the filament I was using.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 76
- Wydruki
- 2
- Wyświetlenia
- 747
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a shelf to store the round spools I was using. This is easy to print and needs no supports. It is super strong with PLA, and when used with dowels, you can make it as wide or as tall as you can get dowels for.
I printed with 0.4mm nozzle and 0.3mm layer height. I printed with extra perimeters for strength.
I used ¾" thick dowels. My shelf is 30" wide and 5' tall.
I use #6 trim head screw to attach the shelf dowels to the sides. https://tinyurl.com/26rxs2re
I used a M3 set screw to attach the shelves to the upright dowels https://tinyurl.com/3t6dyspt