Filament Shelf using dowels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a better way to store the filament I was using.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 76
- Makes
- 2
- Views
- 747
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a shelf to store the round spools I was using. This is easy to print and needs no supports. It is super strong with PLA, and when used with dowels, you can make it as wide or as tall as you can get dowels for.
I printed with 0.4mm nozzle and 0.3mm layer height. I printed with extra perimeters for strength.
I used ¾" thick dowels. My shelf is 30" wide and 5' tall.
I use #6 trim head screw to attach the shelf dowels to the sides. https://tinyurl.com/26rxs2re
I used a M3 set screw to attach the shelves to the upright dowels https://tinyurl.com/3t6dyspt