S21 case, Designed for PETG (6.2 in model)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ATTENTION: this requires mirroring on the x axis. This is like the 20th version of this case for me. I am really happy…
- Ocena
- 4 / 5
- Polubienia
- 1
- Pobrania
- 73
- Wydruki
- 1
- Wyświetlenia
- 376
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
ATTENTION: this requires mirroring on the x axis.
This is like the 20th version of this case for me. I am really happy with the fit. It should not require any scaling or adjustment. At least it doesn't on my ender 3 v2.
The back of the case is just thick enough to protect the camera on flat surfaces.
print with 5 perimeters at least. This avoids infill in thin sides which hurts quality.
If you want to try something fun, print with no top or bottom layers and 5 perimeters. This lets the large flat section of the case show whatever infill pattern you chose. I usually go with at least 45% density and it is still stiff enough.
This works great it PETG and doesn't need to flex much. I'd bet it would work with PLA but I don't have any to try it with.
I also have a almost dimensionally accurate model of the s21 on my thingiverse page that I used as a cutting tool in my modeling software to make this case. scaled it up about 1.5% in length and it worked great for me.
Category: Mobile Phone