1 / 2
Stove Igniter Safety Cap for Whirlpool (1.2mm thick) — zdjęcie 1
1 / 2

Stove Igniter Safety Cap for Whirlpool (1.2mm thick)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Safety stove top caps for your Whirlpool stove igniters.

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
171
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Safety Cap for your Whirlpool stove igniters. Our stove activates all 4 igniters when pressing any igniter.  To eliminate accidentally triggering them when setting things on the stove top, I designed these caps. It also helps identify which burner is on when the cap is removed and can be a helpful visual aid if the cap is off that your burner may still be on.  These caps can also save you from getting a good shock when cleaning the stove.

Ideally, these caps should be printed in ASA or any filament you think can stand up to accidentally bumping into it with something hot.  My initial test shown in the photos used PLA, but we set a cookie sheet on the stove and bumped the cap with it melting the top (as you can see in the second picture. 

This was designed with 1.2mm thick walls to accommodate for two wall thick printing with 0.6mm nozzles, or 3 walls with 0.4mm nozzles.

I have a Vase Mode version of this stove cap for printing with a 0.6mm nozzle in another model.  This one is thicker and a tad more durable but the Vase Mode one functions just as well, but prints quite a bit faster.

Tagi