1 / 2
Katsu / Makita Trim Router Templating adapter for the plunge base (version2) — zdjęcie 1
1 / 2

Katsu / Makita Trim Router Templating adapter for the plunge base (version2)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple print that enables templating guides to be installed in a makita/katsu trim router plunge base

Ocena
0 / 5
Polubienia
14
Pobrania
75
Wydruki
0
Wyświetlenia
937
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This simple adapter piece fits within the Katsu / Makita trim router plunge base, and allows you to install templating collars, I've used this with a 18mm templating collar.

You may need to slightly sand the edges as its pretty snug fitting.

You will need to supply the fixtures to hold the templating collar in place.

differences from version 1 to version 2:

V2 - has the Trend templating part much closer to the routers base level

V2 - m4 bolts self tap into the adapter

V2 - much snugger fit in the plunge base.

V2.1 - retains 68mm diameter



Old vs new
 

 

Note: on v2 you will need to screw down those securing bolts on the router base to crush the plastics to have them flush fitting:
 

V2 on the left, v1 on the right:

Big thanks go out to @GregorErdmann_308254 for suggesting the edit :)
 

Tagi