Katsu / Makita Trim Router Templating adapter for the plunge base (version2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple print that enables templating guides to be installed in a makita/katsu trim router plunge base
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 75
- Makes
- 0
- Views
- 937
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This simple adapter piece fits within the Katsu / Makita trim router plunge base, and allows you to install templating collars, I've used this with a 18mm templating collar.
You may need to slightly sand the edges as its pretty snug fitting.
You will need to supply the fixtures to hold the templating collar in place.
differences from version 1 to version 2:
V2 - has the Trend templating part much closer to the routers base level
V2 - m4 bolts self tap into the adapter
V2 - much snugger fit in the plunge base.
V2.1 - retains 68mm diameter
Old vs new


Note: on v2 you will need to screw down those securing bolts on the router base to crush the plastics to have them flush fitting:

V2 on the left, v1 on the right:

Big thanks go out to @GregorErdmann_308254 for suggesting the edit :)