Magnetic Flexible Recycling Symbol
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recycling Symbol with holes for 8x3mm magnets, and flexible connectors between parts allowing it to fit curved surfaces.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 281
- Wydruki
- 2
- Wyświetlenia
- 634
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
The symbol comes in two versions - one roughly 16cm in diameter and one roughly 8cm. Both are 5mm high and have a 9x4mm hole in each of the six components.
The connectors between the components are intentionally very thin, to allow the symbol to be flexible, as I needed to stick it on a curved surface. I recommend sticking it to the surface with the bottom towards the viewer, because (1) The bottom is slightly thicker and (2) The bottom typically looks nicer.
Best at 0.2mm layer height. Don't forget to add a pause if you need to put the magnets in!