Magnetic Flexible Recycling Symbol
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recycling Symbol with holes for 8x3mm magnets, and flexible connectors between parts allowing it to fit curved surfaces.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 281
- Makes
- 2
- Views
- 634
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
The symbol comes in two versions - one roughly 16cm in diameter and one roughly 8cm. Both are 5mm high and have a 9x4mm hole in each of the six components.
The connectors between the components are intentionally very thin, to allow the symbol to be flexible, as I needed to stick it on a curved surface. I recommend sticking it to the surface with the bottom towards the viewer, because (1) The bottom is slightly thicker and (2) The bottom typically looks nicer.
Best at 0.2mm layer height. Don't forget to add a pause if you need to put the magnets in!