Micro SD card carrier - ultra compact, snap-fit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ultimate storage container for Micro SD cards for hikers, motor bike vloggers and outdoor enthusiasts.
- Ocena
- 4,714 / 5
- Polubienia
- 77
- Pobrania
- 543
- Wydruki
- 7
- Wyświetlenia
- 1507
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Use case
When your are doing action camera videos from your motorbike, bicycle, mountain bike, paraglider, etc., you don't have a lot of space but need a lot of SD cards. This is what this tough but very compact container is made for. It comes with a strong snap-fit hook, that makes sure the container does not open accidently.
Printing
Print both parts in the uploaded orientation. I recommend 3 or more perimeters and at least 25% infill. I have tried both PETG and PLA and both worked well. Due to it's flexibility, I would recommend PETG, but the spring mechanism is not under load when the cover is closed, so PLA should not be a problem despite it's “floating” behavior. The complete cover top side is used as spring, therefore even relatively bridle material like PLA does work fine.
Wear-in required
At the first few open/close cycles, it may feel a bit hard moving. Especially PLA wears in quickly if you move it quickly a few times. Thanks to the distinct “hook” in the middle of the tray, it should still hold together well, even if it is a bit worn out.
Please like it if you like it!
Your satisfaction is my reward. Please let me know if you are happy with the design.
Happy printing!