Micro SD card carrier - ultra compact, snap-fit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The ultimate storage container for Micro SD cards for hikers, motor bike vloggers and outdoor enthusiasts.
- Rating
- 4.714 / 5
- Likes
- 77
- Downloads
- 543
- Makes
- 7
- Views
- 1,507
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Use case
When your are doing action camera videos from your motorbike, bicycle, mountain bike, paraglider, etc., you don't have a lot of space but need a lot of SD cards. This is what this tough but very compact container is made for. It comes with a strong snap-fit hook, that makes sure the container does not open accidently.
Printing
Print both parts in the uploaded orientation. I recommend 3 or more perimeters and at least 25% infill. I have tried both PETG and PLA and both worked well. Due to it's flexibility, I would recommend PETG, but the spring mechanism is not under load when the cover is closed, so PLA should not be a problem despite it's “floating” behavior. The complete cover top side is used as spring, therefore even relatively bridle material like PLA does work fine.
Wear-in required
At the first few open/close cycles, it may feel a bit hard moving. Especially PLA wears in quickly if you move it quickly a few times. Thanks to the distinct “hook” in the middle of the tray, it should still hold together well, even if it is a bit worn out.
Please like it if you like it!
Your satisfaction is my reward. Please let me know if you are happy with the design.
Happy printing!