EMAX motor wrench (rs2205s, rs2306, rs1306)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Models: emax_motor_wrench_v1.0r.stl -----> standard wrench for rs2205/rs2306 emax_motor_wrench_motor_guard_v1.0r.stl…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Models:
- emax_motor_wrench_v1.0r.stl -----> standard wrench for rs2205/rs2306
- emax_motor_wrench_motor_guard_v1.0r.stl ----> same as #1 but for people who have motor guards and cannot fit the standard wrench
- emax_motor_wrench_1306_motor_size_only_v1.0r.stl ----> for rs1306 sized motors
This is a wrench for the newer rs2205s and rs2306 EMAX motors. Also added the rs1306 sized wrench at somebody's request, however, I do not have a motor to test it on, only the tech diagrams of its dimensions to design it with. Please let me know if you do print the rs1306 if it fits.
How I printed it: ABS, 30% infill, thick walls, 0.2mm layers. I believe PLA and any other hard filaments will work, avoid TPU and soft stuff. No support needed.
A nice tip from Ghostface in the comments: It will fit the 1407 racestar motors perfectly if you scale the 1306 one up to 110%!
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
30
Category: R/C Vehicles