Modular 3.5" HDD Cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought a used Case, but the HDD cage was missing. So I had to make a new one. It is pretty generic.
- Ocena
- 4,917 / 5
- Polubienia
- 377
- Pobrania
- 2709
- Wydruki
- 13
- Wyświetlenia
- 29 132
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
I bought a used Case, but the HDD cage was missing. So I had to make a new one.
It is pretty generic. It is designed for M3x10 and M3x16 bolts and hex nuts. I desinged it for Noctua Fans. But other fans should fit ass well. I highly recommend cooling the disks.
Print instructions
50% Infill, PETG recommended, but PLA schould work to.
hdd brackets
The brackets are mirrored. You need 2 of each bracket for 4 drives. You can stack them as high as you want and bolt them together with M3x10 bolts and nuts
The brackets don't need supports.
Fan Addon
Print supports on the buildplate only. Depending on the ventilation in your case you may want to add a 120mm fan. You screw it on with M3x16 Bolts and nuts. You also need the mounting hardware for the fan. fan screws or something similar.