Ikea Bekväm kitchen cart foot end
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pair of feet end and spacers to screw under an Ikea Bekväm feet to prevent from being in contact with water or humidity.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The foot end is designed to fit under an Ikea Bekväm kitchen cart and there are associated spacer of the same elevation to screw between the caster wheels and the foot.
I am using this kitchen cart for garden grilling activities. The main goal was to prevent the wooden feet from being in contact with water or humidity. It is also elevating the kitchen cart of 18 mm giving a more confortable table top working height. Finally the design is featuring an invisible but stunning honeycomb inside that is perfect for holding vertical load and allowing any water to flow throug.
Printing
I recommend using PETG and printing with 3 perimeters minimum to hold more load. I am providing 3MF files and Gcode for Prusa MINI and PETG. There are files for printing each part individually and another file compiling both parts in two instances to print all in one run.
Assembling
I recommend using the following hardware for the assembly:
- 3x30 mm flat head screw (x8) for attaching the two foot ends
- 4x40 mm flat head screw (x8) for attaching the caster wheels with the spacers and replacing the original screws