1 / 1
ABS / Traction control delete spacer for 701 husqvarna or 690 KTM 2020+
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spacer have been designed to disable the speed sensor on the rear wheel. This desactivate ABS for both wheels + TC
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 238
- Wydruki
- 0
- Wyświetlenia
- 2621
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (1)Kolekcje (16)Powiązane
Disclaimer : Use it at your own risk. Road regulation in your country probably forbid such a modification. It is designed for 2020+ bikes or higher (despite it can probably used on other bikes)
By adding this spacer on the rear speed sensor, the bike isn't able to compute a difference of speed between the two wheels. Meaning that the ABS and Traction control remains disconnected.
Others informations
- You will have a dash error after a short ride. To remove it from the dash, you just have to make a short ride after removing this spacer.
- The ABS button will be yellow at any time.
- The Traction control button will be yellow at any time.
- You can remove the spacer, and reactivate the ABS + TC.
- The speed will then be only monitored by the front wheel.
- The speedometer will work and you will have your milleage / km stored on the bike as without the spacer
Cons :
- It use the oem torx, and you will need a tool to remove the spacer. Not good in a hurry.