Card Wallet customizable with single actuation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Card Wallet customizable for as many cards you like, Cards are single actuated (or in groups)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 847
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This Wallet can have as many Cards as you like, if you have M3 Screws in the right length. There are Card holders for thicker cards ca 1.2mm ( marked C-Card+ ,Lever+ ) and for Standard Cards ca 0,8mm. Card Holders and the Levers are mirrored ( li vs re ). You can use a Colour Code for the Cards by printing the Levers in different Colours or colourizing them.
I made the Wallet for 9 Cards ( two + and 7 Stds ), so i could use 4 M3x20 Screws. The Cards dont fall out easily, but i secured them with a 3mm elastic Band. Printing is very easy, i printed with Extrudr GreenTec Pro
nd