Card Wallet customizable with single actuation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Card Wallet customizable for as many cards you like, Cards are single actuated (or in groups)
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 54
- Makes
- 0
- Views
- 847
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
This Wallet can have as many Cards as you like, if you have M3 Screws in the right length. There are Card holders for thicker cards ca 1.2mm ( marked C-Card+ ,Lever+ ) and for Standard Cards ca 0,8mm. Card Holders and the Levers are mirrored ( li vs re ). You can use a Colour Code for the Cards by printing the Levers in different Colours or colourizing them.
I made the Wallet for 9 Cards ( two + and 7 Stds ), so i could use 4 M3x20 Screws. The Cards dont fall out easily, but i secured them with a 3mm elastic Band. Printing is very easy, i printed with Extrudr GreenTec Pro
nd