XLite100 seat mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got one XLite100 with the first e-bike I bought (Nireeka Homie) and the light seems to work nicely. After getting…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I got one XLite100 with the first e-bike I bought (Nireeka Homie) and the light seems to work nicely. After getting another e-bike (Nireeka Prime), but this time without the backlight, I thought that it would be nice to swap the light between bikes as needed. So I designed this seat mount, it mimics the original mount and is attached to the seat with zipties.
OpenSCAD source here: https://github.com/spegelius/3DModels/tree/master/XLite100
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
No
Resolution:
0.15-0.25
Infill:
25%
Filament: 3DJake PETG Black
Notes:
I used 4 perimeters. If the light is too tight to screw in, you can try scaling the model slightly in X and Y to make it looser
Category: Sport & Outdoors