XLite100 seat mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I got one XLite100 with the first e-bike I bought (Nireeka Homie) and the light seems to work nicely. After getting…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got one XLite100 with the first e-bike I bought (Nireeka Homie) and the light seems to work nicely. After getting another e-bike (Nireeka Prime), but this time without the backlight, I thought that it would be nice to swap the light between bikes as needed. So I designed this seat mount, it mimics the original mount and is attached to the seat with zipties.
OpenSCAD source here: https://github.com/spegelius/3DModels/tree/master/XLite100
Print Settings
Printer Brand:
Prusa
Printer:
Mk2.5s
Rafts:
No
Supports:
No
Resolution:
0.15-0.25
Infill:
25%
Filament: 3DJake PETG Black
Notes:
I used 4 perimeters. If the light is too tight to screw in, you can try scaling the model slightly in X and Y to make it looser
Category: Sport & Outdoors