1 / 2
Tronxy X5S Mega gantry plates (with tensioners) — zdjęcie 1
1 / 2

Tronxy X5S Mega gantry plates (with tensioners)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Update 12/27/2019: made the gantries bit smaller and added bevels added top bearings support parts The original plates…

Ocena
0 / 5
Polubienia
2
Pobrania
32
Wydruki
0
Wyświetlenia
396
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Update 01/31/2024:

  • tuned the gantry size more
  • added 2020 profile slot guides
  • added some internal holes to force more perimeters (for stiffness)
  • fatter top bearing supports
  • fixed some minor issues with top bearing supports fitting the main parts

Update 12/27/2019:

  • made the gantries bit smaller and added bevels
  • added top bearings support parts

The original plates work fine, but I managed to loosen one of the wheel bolt holes by using too much force while installing them,and now it doesn't have very good tension. So had the idea of using M4 bolts as tensioners for the bolts/wheels.

Needs 4 M4 bolts and nuts.

OpenSCAD source: https://github.com/spegelius/3DModels/blob/master/PrinterParts/Tronxy/Mega_gantry_remix.scad

Don't use PLA as it deforms over time. I printed the latest versions with XT-CF20 carbon fibre filament with 3 perimeters and lots of infill.

Tagi