1 / 2
Tronxy X5S Mega gantry plates (with tensioners) — image 1
1 / 2

Tronxy X5S Mega gantry plates (with tensioners)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Update 12/27/2019: made the gantries bit smaller and added bevels added top bearings support parts The original plates…

Rating
0 / 5
Likes
2
Downloads
31
Makes
0
Views
396
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Update 01/31/2024:

  • tuned the gantry size more
  • added 2020 profile slot guides
  • added some internal holes to force more perimeters (for stiffness)
  • fatter top bearing supports
  • fixed some minor issues with top bearing supports fitting the main parts

Update 12/27/2019:

  • made the gantries bit smaller and added bevels
  • added top bearings support parts

The original plates work fine, but I managed to loosen one of the wheel bolt holes by using too much force while installing them,and now it doesn't have very good tension. So had the idea of using M4 bolts as tensioners for the bolts/wheels.

Needs 4 M4 bolts and nuts.

OpenSCAD source: https://github.com/spegelius/3DModels/blob/master/PrinterParts/Tronxy/Mega_gantry_remix.scad

Don't use PLA as it deforms over time. I printed the latest versions with XT-CF20 carbon fibre filament with 3 perimeters and lots of infill.

Tags