Relocated X-endstop for Ender3 machines using linear rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simply moves the endstop closer to the front
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 365
- Wydruki
- 5
- Wyświetlenia
- 1669
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
No print support needed!
I know this is not the first model for this purpose, this one uses heat inserts (M3, 4mm long, 4.6mm or 5mm OD)
Also added a bunch of additional mounting point (meant to use heat inserts M3, 4mm long, 4.6mm or 5mm OD.) for accessories and such because why not! never know when these can come in handy.
Besides the 4 stock motor mounting screw holes use M3x6
To play on the safe side would avoid PLA as the long screws might carry the heat of the motor. If you do PLA keep a close eye on it
------
Support me on Patreon so I can make more stuff!
You also get access to the STEP file and a cover as a bonus (and other models)
https://patreon.com/squirrelf3d