1 / 11

Kress trim router base

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made this router base for my Kress 1050-1 router. It normally sits in my CNC machine, but it is just too nice not to…

Aktualizacja u źródła: 26 sie 2022

Informacje o modelu

I made this router base for my Kress 1050-1 router.

It normally sits in my CNC machine, but it is just too

nice not to use for anything else.

It's a very accuate and powerful machine that fits in

one hand, so with this base you can convert it to

a trim/palm router.

The height is adjustable with 3 screws.

All screws in this desing are 10mm M5 machine screw and use

M5 inserts (search ebay for "M5 Steel Threaded Flat Insert")

There a two bottom half designs, one is completely round with

a diameter of 10cm, the other has an indent of 1cm (so distance

flat side to center is 4 cm) and has the option to screw on a

accessory.

I included an accessory block on which you can easily screw or

glue a flat piece of 6mm thick plywood to use as a circle jig.

The base clamps onto the router with a collarclamp. the neck of the Kress

has a diameter of 43mm, so you can use it on other routers if the diameter

is the same.

A list of routers/spindels with a 43mm neck diameter:

I printed it in ABS with 3 solid outlines and a infill of 35%

Category: Machine Tools