Stubby screwdriver bit holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes even a stubby screwdriver just isn't short enough :-( That's why i made this ultra short one with room to…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Sometimes even a stubby screwdriver just isn't short enough :-(
That's why i made this ultra short one with room to store an extra of 6 bits.
It's 25 mm tall and has a diameter of 40 mm.
When the bits are stored in the handle, noting sticks out, so comfortable to
wear in your jeans pockets.
Also provided;
A little test peace to print out to check for correct fitment
(every printer and filament and printersettings are different), so
you can determine a correct resize factor if needed without printing
the whole thing a few times ;-)
Print preferrably in ABS or stronger material.
I printed the thing in ABS with a wall thickness of 6 and a infill percentage of 50%.
No support or brim is needed.
After printing it got an ABS vapour treatment.
Category: Hand Tools