1 / 9
Ruler stop for steel ruler / Linealanschlag für Stahlmaßstab (25mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First, this thing is inspired by https://www.youtube.com/watch?v=L-TO0nui0pc&t= use some sandpaper to finish perhaps…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 874
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (26)Powiązane
First, this thing is inspired by https://www.youtube.com/watch?v=L-TO0nui0pc&t=
- use some sandpaper to finish
- perhaps you have to scrape some ABS with a knife at the recess for a tight fit
- cut a M5 thread in the hole at the part without the 1mm recess
- some black spraypaint
- with a strong ABS glue, bond the two parts together (line up the holes with a set screw)
- I used a set screw from an old miter saw (15mm in my case, 20mm max.)
Be careful when tightening the screw. Its only a plastic thread!!!
EDIT:
I add 2 thumbscrew´s (M5 Imbus and countersunk). You can glue it in place with epoxy or fix it with a nut.
Also I add another version of the ruler stop. Now you can insert an M5 nut.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
30%
Category: Hand Tools