1 / 9
Ruler stop for steel ruler / Linealanschlag für Stahlmaßstab (25mm) — image 1
1 / 9

Ruler stop for steel ruler / Linealanschlag für Stahlmaßstab (25mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

First, this thing is inspired by https://www.youtube.com/watch?v=L-TO0nui0pc&t= use some sandpaper to finish perhaps…

Rating
0 / 5
Likes
18
Downloads
119
Makes
1
Views
877
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

First, this thing is inspired by https://www.youtube.com/watch?v=L-TO0nui0pc&t=

  • use some sandpaper to finish
  • perhaps you have to scrape some ABS with a knife at the recess for a tight fit
  • cut a M5 thread in the hole at the part without the 1mm recess
  • some black spraypaint
  • with a strong ABS glue, bond the two parts together (line up the holes with a set screw)
  • I used a set screw from an old miter saw (15mm in my case, 20mm max.)

Be careful when tightening the screw. Its only a plastic thread!!!

EDIT:

I add 2 thumbscrew´s (M5 Imbus and countersunk). You can glue it in place with epoxy or fix it with a nut.

Also I add another version of the ruler stop. Now you can insert an M5 nut.

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Mk1

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2

Infill:

30%

Category: Hand Tools

Tags