Protective Face Shield High Speed Remix - RC2X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set myself a half day challenge to half the print time of the RC2 face shield.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 405
- Wydruki
- 1
- Wyświetlenia
- 1651
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Set myself a half day challenge to half the print time of the RC2 face shield. Prototype revision for high-speed printing 1 hour 30 minutes for 1, could be faster.
We are currently producing sets for food delivery volunteers for the elderly here in Portsmouth UK.
Revision 1
As requested, a stack of 6 is ready for download
• No extra supports needed includes snap off supports
• Floating elastic anchor
• 0.25mm layer height only - otherwise it doesn't work
• Sensitive to temperature drafts
High-Speed Revision
The revision was built from the ground up, using the original RC2 specification, albeit with some efficiency changes.
• 10mm total height
• Optimised to print in 1 hour 30 minutes from the i3 MK3S with a 4mm brim (Some print settings change may be needed) or 2 units in 2 hours 55 minutes.
• 3 versions: Fastest, With Vents, and Shrouded
Can go faster. Comment your print times =)
Print instructions
Recommended Print Setting
• 75mm/s Perimeters
• 45mm/s External Perimeters
• 3 Perimeter
• 0.25 Layer Height
• 4mm brim for added stickiness
• 30% Infill