Protective Face Shield High Speed Remix - RC2X
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set myself a half day challenge to half the print time of the RC2 face shield.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 405
- Makes
- 1
- Views
- 1,651
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Set myself a half day challenge to half the print time of the RC2 face shield. Prototype revision for high-speed printing 1 hour 30 minutes for 1, could be faster.
We are currently producing sets for food delivery volunteers for the elderly here in Portsmouth UK.
Revision 1
As requested, a stack of 6 is ready for download
• No extra supports needed includes snap off supports
• Floating elastic anchor
• 0.25mm layer height only - otherwise it doesn't work
• Sensitive to temperature drafts
High-Speed Revision
The revision was built from the ground up, using the original RC2 specification, albeit with some efficiency changes.
• 10mm total height
• Optimised to print in 1 hour 30 minutes from the i3 MK3S with a 4mm brim (Some print settings change may be needed) or 2 units in 2 hours 55 minutes.
• 3 versions: Fastest, With Vents, and Shrouded
Can go faster. Comment your print times =)
Print instructions
Recommended Print Setting
• 75mm/s Perimeters
• 45mm/s External Perimeters
• 3 Perimeter
• 0.25 Layer Height
• 4mm brim for added stickiness
• 30% Infill