Elevator screw for BRUDER Manitou telescopic loader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The crank broke so we needet a replacement part for the Manitou
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 151
- Wydruki
- 1
- Wyświetlenia
- 873
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I had to glue and repair the crank handle a couple of times before, even added a screw to hold it together, but now it was time to replace the whole part.
The screw moves easy and runs perfect. Be careful to click in the tip, in order not to snap of the securing lid on the Manitou.
Designed with fusion360
Notes:
I rotated the part to lay flat, also rotated so that the handle lay flat.
After that I lowered the part into the build plate so that the threats were touching the build plate.
I added support blocker for the handle and threat so that only the tip was supported.