MagLite ML25 LT Case V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the MagLite ML25 flashlight.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Updated version of the my Mag-Lite ML25 LT case. On the pictures V2 is in black and V1 in red.
V2 description:
The new model is an original model designed to be printed without supports, in FLEX filament. It should also work in PLA or any other filament. The case (longer of two parts) prints standing, and the printer should have no problem with the overhang as it is 20º. The lid prints standing as well. When slicing using the STL, please make sure to orient the lid correctly - closed side on bed, open side up.
Recommended printing settings:
- Flex filament;
- 0.2 Structural Preset on the mini;
- 15% cubic infill;
- 2 perimeters.
V1 description:
The V1 uses the hinges and closing mechanism from Multi-Use Case with Inserts model. I have included all the files, so feel free to modify it.
Recommended printing settings:
- PLA;
- 0.2 Speed preset;
- 15% infill;
- Supports needed;
Happy printing! If you print it, please post a make!