Spectrum DSMX hack module cover- FrSky Taranis X9D+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed this door for my dsmx hack that i did with my tarannis using is…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed this door for my dsmx hack that i did with my tarannis using is board; https://www.radiocontronics.com/Taranis-Spektrum-Hack-DSMX-Module
This is the module cover made by Painless360 only I have removed his logo and replaced it with spectrum's bars. I used his because it's easy to print and it doesn't have the unnecessary internal box.
I paused the print after a few layers of gray pla and finished it with black for contrast so it blends nicely with my X9D+ and harkens back it the cannibalized DX6i. originally i wanted the first color to be clear so it could be lit red from inside like my DX8, but my module doesn't have the led like others.
Post-Printing
Deburr the print and after a test fit, sand the to joining faces slightly then use thin CA super glue to attach the clip.
You'll need a ufl to sma cable and a 2.4ghz antenna, I tried a router anntenna with ok results but have now switched to the VAS folded microwave dipole; https://www.getfpv.com/vas-microwave-folded-dipole-2-4ghz.html?gclid=Cj0KCQjw3v3YBRCOARIsAPkLbK7Krwno0Vapus4EAncqL_aMHRg7y2ocD9eJ6KSxnZCsfd5Sq_lKNrEaAo9LEALw_wcB
Category: R/C Vehicles