Spectrum DSMX hack module cover- FrSky Taranis X9D+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed this door for my dsmx hack that i did with my tarannis using is…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I needed this door for my dsmx hack that i did with my tarannis using is board; https://www.radiocontronics.com/Taranis-Spektrum-Hack-DSMX-Module
This is the module cover made by Painless360 only I have removed his logo and replaced it with spectrum's bars. I used his because it's easy to print and it doesn't have the unnecessary internal box.
I paused the print after a few layers of gray pla and finished it with black for contrast so it blends nicely with my X9D+ and harkens back it the cannibalized DX6i. originally i wanted the first color to be clear so it could be lit red from inside like my DX8, but my module doesn't have the led like others.
Post-Printing
Deburr the print and after a test fit, sand the to joining faces slightly then use thin CA super glue to attach the clip.
You'll need a ufl to sma cable and a 2.4ghz antenna, I tried a router anntenna with ok results but have now switched to the VAS folded microwave dipole; https://www.getfpv.com/vas-microwave-folded-dipole-2-4ghz.html?gclid=Cj0KCQjw3v3YBRCOARIsAPkLbK7Krwno0Vapus4EAncqL_aMHRg7y2ocD9eJ6KSxnZCsfd5Sq_lKNrEaAo9LEALw_wcB
Category: R/C Vehicles
