Raised Filament Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A raised filament rack made with 7/8" (~22mm) dowl rods that 26mm desiccant packs can sit under.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 733
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found myself struggling to fit desiccant packs in my dry box and was worried that the filament spools would bust them open when the box got jostled around. To fix this I made a raised filament rack that would keep spools organized and prevent them from sitting on or crashing into the desiccant packs. The rack is made using 7/8" (~22mm) dowl rods and printed in PETG (though PLA would work just fine). A 26mm tall desiccant pack slides nicely under the rack without touching the spools, you can find the ones I'm using here.
Printer settings:
0.6 nozzle
0.3 layer hight
2 perimeters
15% infill (cubic)
Printed in PETG but you could use PLA