Door hook, button presser with enclosure MK1 (No touching tool)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated version MK2: https://www.prusaprinters.org/prints/26725-door-hook-button-presser-with-enclosure-mk2-no-tou…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 616
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Updated version MK2: https://www.prusaprinters.org/prints/26725-door-hook-button-presser-with-enclosure-mk2-no-tou
Many of the other no touching tools do not have any type of enclosure which we will touch it with our hands or clothes eventually. Even those with an enclosure, it is a separate enclosure so it is not as convenient. This design is inspired by the army knife design where you could pull the hook out and store it without a separate enclosure!
Another main point of my design is that it would lock in place when opened or closed so it would not accidentally wobble or slide out of place. (There is a slight click when fully opened and closed, which is a bit satisfying, but don't fidget with it after using it in public!)
It could also act as a keychain or just put it in your pocket when going out.
Print instructions
G-Code is provided for MK3S printers
Model orientation when printing is shown on the provided pictures
The shaft is printed horizontally to increase strength
Around 2 hours of print time
Print settings:
0.15mm
15% infill
3 perimeters
Support on build plate only (for the horizontal shaft)