DMC2 CNC Finishing Caps - For Steel Tubes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These fit over the open end of the two vertical pillars of the main frame and the two horizontal tubes for the X-Axis.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These add a finishing touch to your DMC2 CNC machine by capping off the open tubes of the two vertical pillars and the two horizontal tubes for the X axis. You can buy caps, but since you have a 3d Printer, why not print them. You can even print in an accent color if you want. These work great on my machine, but I am not certain how exact the tubes are, so yours may fit just a bit tighter or looser.
Print 2 of the rectangular pillar caps and 4 of the smaller square X-axis tube caps. They fit snugly in place.
Printing:
Print in the orientation they are in, with no supports. I printed 0.12lh and 0.6 nozzle with PLA+ at 120mm/s
The fine line height helps the chamfer look better. If using Cura, if you want a slightly faster print, use the Adaptive Layers option and it will automatically change the line height based on the geometry.