DMC2 CNC Finishing Caps - For Steel Tubes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These fit over the open end of the two vertical pillars of the main frame and the two horizontal tubes for the X-Axis.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 79
- Makes
- 0
- Views
- 353
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These add a finishing touch to your DMC2 CNC machine by capping off the open tubes of the two vertical pillars and the two horizontal tubes for the X axis. You can buy caps, but since you have a 3d Printer, why not print them. You can even print in an accent color if you want. These work great on my machine, but I am not certain how exact the tubes are, so yours may fit just a bit tighter or looser.
Print 2 of the rectangular pillar caps and 4 of the smaller square X-axis tube caps. They fit snugly in place.
Printing:
Print in the orientation they are in, with no supports. I printed 0.12lh and 0.6 nozzle with PLA+ at 120mm/s
The fine line height helps the chamfer look better. If using Cura, if you want a slightly faster print, use the Adaptive Layers option and it will automatically change the line height based on the geometry.