Behringer Xenyx q802USB wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Behringer Xenyx q802USB wall mount with a headphone stand
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
Wall mount for Behringer Xenyx q802USB with Headphone stand.
- You can hide Xenyx cables ( and the ferrite ring)
- You can lead an XLR cable (10mm max) through the wall mount (on my picture: Roland professional audio cable)
- There are 2 more holes for M3 screws for future parts (on the left of the wall mount)
- Headphone stand (for 40-55mm wide headphones - on my picture: HD 560S)
More info: I used M3x25 screws for the cover.
Attachments:
A drawing with a few dimensions (please check the attached pdf) if you want to double-check something.
.SHAPR file if you want to change something in the Parasolid version.
.STL, .3MF files for 3D printing.
Print settings:
Use Skirt for the cover to avoid adhesion problems (there is a small “pillar” on the right side of the cover)
Use support for the headphone stand part (Plate only was perfect for me)
Infill: My recommendation is around 25-30% infill but it depends on your material/printer.
I used PLA+ without any problems (PRUSA Mini)