Behringer Xenyx q802USB wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Behringer Xenyx q802USB wall mount with a headphone stand
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 47
- Makes
- 1
- Views
- 450
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
Wall mount for Behringer Xenyx q802USB with Headphone stand.
- You can hide Xenyx cables ( and the ferrite ring)
- You can lead an XLR cable (10mm max) through the wall mount (on my picture: Roland professional audio cable)
- There are 2 more holes for M3 screws for future parts (on the left of the wall mount)
- Headphone stand (for 40-55mm wide headphones - on my picture: HD 560S)
More info: I used M3x25 screws for the cover.
Attachments:
A drawing with a few dimensions (please check the attached pdf) if you want to double-check something.
.SHAPR file if you want to change something in the Parasolid version.
.STL, .3MF files for 3D printing.
Print settings:
Use Skirt for the cover to avoid adhesion problems (there is a small “pillar” on the right side of the cover)
Use support for the headphone stand part (Plate only was perfect for me)
Infill: My recommendation is around 25-30% infill but it depends on your material/printer.
I used PLA+ without any problems (PRUSA Mini)