Trip-Trap high chair plug.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My wife is tired of food residue in the hole for the baby insert on our Trip-Trap high chair. So I had to make one.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 60
- Wydruki
- 3
- Wyświetlenia
- 744
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hey, yes you, if you have slightly older children who use the Trip-Trap high chair, and find it annoying with food residues in the hole from the holder to the baby insert. So don't worry, here is the solution, a small plug that is simply put into the hole, so that the child's spilled food does not sit in there and is difficult to clean.
I have made one in TPU so that it closes more tightly than the one in PLA/PETG
But if you dont have TPU, then you always can make it in PLA/PETG.
Printer:
Prusa MK3S+.
Rafts:
No.
Supports:
No.
Brim:
No.
Resolution:
0,2mm.
Infill:
PLA/PETG - 20%.
TPU - 100%
Filament:
Prusament jet black PLA.
Prusament jet black PETG.
Prigo TPU98A transparent.