4" duct to 5.1" window vent adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connect your flexible duct to a window AC ventilation port! Perfect for ventilating a 3D printer enclosure to outside!
- Ocena
- 0 / 5
- Polubienia
- 88
- Pobrania
- 286
- Wydruki
- 0
- Wyświetlenia
- 5536
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Connect a printer enclosure ventilation system to the outside using this adapter, which goes from a 4" duct (like this) to a 5.1" window AC vent (like this).
There are two models, one that has a backing attached to the model, and one that has it seperate. The backing on model needs support to be printed, and the separate backing does not.
Print with 4 vertical walls @ .4mm nozzle and there should be no infill, which should make print time decently fast. Recommended layer height is .2mm