4" duct to 5.1" window vent adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.44 – €0.54 net (excluding VAT)
For file: Fan Adapter backing_0.2mm_PETG_MINI_31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.49 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 30.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Connect your flexible duct to a window AC ventilation port! Perfect for ventilating a 3D printer enclosure to outside!
- Rating
- 0 / 5
- Likes
- 88
- Downloads
- 289
- Makes
- 0
- Views
- 5,563
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
Connect a printer enclosure ventilation system to the outside using this adapter, which goes from a 4" duct (like this) to a 5.1" window AC vent (like this).
There are two models, one that has a backing attached to the model, and one that has it seperate. The backing on model needs support to be printed, and the separate backing does not.
Print with 4 vertical walls @ .4mm nozzle and there should be no infill, which should make print time decently fast. Recommended layer height is .2mm