1 / 2
Mini-AfterSherpa for Orbiter 2.0, E3D REVO Voron and 3010 fan (Voron V0.1)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was building a Voron V0.1 and decided to go the 24V 3010 fan route instead of the 5V 3007 fan that lacked power...
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 123
- Wydruki
- 1
- Wyświetlenia
- 2005
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 9)Remiksy (0)Kolekcje (38)Powiązane
This mod is very specific for Voron 0.1 if you need better hotend cooling and you are using an Orbiter Extruder...
Because there is no much extra space in the mini AB, Dragon hotends are not compatible with this mod. I decided to use a Revo Voron from E3D because it's the only one that allow the use of a beefier fan !
I used MiniAftersherpa sources to create this mod : https://github.com/PrintersForAnts/Mini-AfterSherpa