1 / 4
Modified WordClock Case and Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the german "Wordclock Wortuhr" case comprising the following changes:
- I added a printed diffusor layer finishing the front cover.
- I removed the hanger assembly on the back and the cable inlet on the side as I prefer to use the clock with a stand.
- I removed the DIP mount from the interior part as I connected the USB cable to the ESP directly.
- I added a cable inlet and cord grip on the back accordingly.
- I designed a new “invisible” stand.
Thanks to N1cls and AWSW for this great project and their support building the word clock!
Hints
- When printing the multi-colored front cover make sure the first two layers for the diffusor are printed in a light or translucent color. The following layers should be printed with dark filament.
- The stand has an inclination of 5% - I suggest to glue it to the back of the clock for more stability (the lower screw will be still accessible.
- These models are just a modified case - for full instructions and appropriate software see “Wordclock Wortuhr”.