1 / 4
Modified WordClock Case and Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the german "Wordclock Wortuhr" case comprising the following changes:
- I added a printed diffusor layer finishing the front cover.
- I removed the hanger assembly on the back and the cable inlet on the side as I prefer to use the clock with a stand.
- I removed the DIP mount from the interior part as I connected the USB cable to the ESP directly.
- I added a cable inlet and cord grip on the back accordingly.
- I designed a new “invisible” stand.
Thanks to N1cls and AWSW for this great project and their support building the word clock!
Hints
- When printing the multi-colored front cover make sure the first two layers for the diffusor are printed in a light or translucent color. The following layers should be printed with dark filament.
- The stand has an inclination of 5% - I suggest to glue it to the back of the clock for more stability (the lower screw will be still accessible.
- These models are just a modified case - for full instructions and appropriate software see “Wordclock Wortuhr”.