Resin vat drip assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Resin drip assembly for usage with Halot One - resin printer. I used a 12mm carbon rod and M6 srews for assembly. This…
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 2045
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Resin drip assembly for usage with Halot One - resin printer.
I used a 12mm carbon rod and M6 srews for assembly.
This assembly is inspired by Min's Craft
I machined the base plate out of aluminum (to shift the center of mass as low as possible and to get all the girls). For a stable stand I used rubber feet underneath.
You can aswell print everything except the rod.
I used this Funnel from Amazon
A smaller one would also be possible.
- 4pcs. M6x10 set screw
- 3pcs. M6x12 flatHead
- I printed everything with supports (for the holes in all parts, and for the VatHolder)
- All fixture holes are 5mm to be tapped with M6.
- The .f3d is customizable (parameters are german)
Print Settings
Printer Brand:
Raise3D
Printer:
Pro2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30
Filament: Generic PLA-CF black
Category: 3D Printer Accessories