RAVPOWER MagSafe Wireless Charger Base / Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom base for RAVPOWER MagSafe Wireless Charger
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
This is a custom base designed to hold the RAVPOWER MagSafe Wireless Charger. Works well with iPhone, AirPod and other devices that support wireless charging. It can be printed in either single color or the STL could be split into two parts and printed in two colors. I recommend printing the top part in TPU to have a soft surface for your mobile phone or other devices to rest on.
There are indentations on the bottom of the base for thin double sided tape so that the base can sit flush on a desk or wall. Note that this is not compatible with the original Apple MagSafe charger as its dimensions are different.
Recommended Print Settings:
- Infill: 15% Concentric
- Top and Bottom Layers: Concentric
- Layer Height: 0.15 / 0.2
- Material: PLA / PETG for bottom part. TPU / PLA / PETG for top part.