Mark Die for NISEI Midnight Sun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dice for use with the new 'Mark' mechanic in the Netrunner/NISEI expansion 'Midnight Sun'.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 737
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Dice for use with the new 'Mark' mechanic in the Netrunner/NISEI expansion 'Midnight Sun'.
Six sided dice, created using Autodesk Fusion 360. Three icons (HQ, Archives and R&D) are repeated two times each.
The 3MF file is at 50mm scale, but I suggest you scale this to 20mm in your slicer for best printing and convenience of use. The sliced GCode file is at 20mm.
Printing at 20mm doesn't require supports. At 50mm supports can be needed, depending on your printer's performance. 15mm layers are recommended to retain all detail.
Printing at smaller sizes than 20mm requires a smaller nozzle than 0.4 to retain sufficient detail to be legible,
Icons are provided by NISEI on a CC BY-ND 4.0 licence.