Mark Die for NISEI Midnight Sun
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.64 – €0.79 net (excluding VAT)
For file: Nisei Die 20mm_0.15mm_PETG_MK3S_55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 55.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dice for use with the new 'Mark' mechanic in the Netrunner/NISEI expansion 'Midnight Sun'.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 87
- Makes
- 1
- Views
- 737
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Dice for use with the new 'Mark' mechanic in the Netrunner/NISEI expansion 'Midnight Sun'.
Six sided dice, created using Autodesk Fusion 360. Three icons (HQ, Archives and R&D) are repeated two times each.
The 3MF file is at 50mm scale, but I suggest you scale this to 20mm in your slicer for best printing and convenience of use. The sliced GCode file is at 20mm.
Printing at 20mm doesn't require supports. At 50mm supports can be needed, depending on your printer's performance. 15mm layers are recommended to retain all detail.
Printing at smaller sizes than 20mm requires a smaller nozzle than 0.4 to retain sufficient detail to be legible,
Icons are provided by NISEI on a CC BY-ND 4.0 licence.