Ender 3 60mm Board Fan Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the cover for the Ender 3 Board, but for a 60mm fan. I used the same kind of fan which is used in the power…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is the cover for the Ender 3 Board, but for a 60mm fan. I used the same kind of fan which is used in the power supply of the Ender 3.
This cover is compatible with a scaled/remixed version of the Power Supply Fan Silencer by timqui: https://www.thingiverse.com/thing:4902989
Just drill through 2 of the holes (I suggest drilling through the correct ones) to attach it.
I printed it with PLA and it hasn't melted yet. As it needs to be stiff (a previous version was thinner and got warped from the heat) I used 3 perimeters, 0.2mm layers (3 top, 3 bottom) and 30% triangles infill.
Thanks to Timqui for the original Power Supply (PSU) fan silencer (Ender 3) https://www.thingiverse.com/thing:4631303
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
30
Filament:
Sunlu PLA
Notes:
I used 3 perimeters, 0.2mm layers (3 top, 3 bottom) and 30% triangles infill.
Category: 3D Printer Accessories