A modification of "Bicycle digital spoke tension meter based on Jobst Brandt design" by cmh
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The only change from the version by cmh, is I have replaced the bar on the back with 20x6mm aluminium bar. I am also…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 985
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The only change from the version by cmh, is I have replaced the bar on the back with 20x6mm aluminium bar. I am also not using the 3d printed spring seat. I cut the top of the cap that came with the dial gauge and turned a small seat to sit on top. The overall length is the same as the 3d printed spring seat.
The two halves of the handle and 4 of the pins are glued together with epoxy.
Use the "Drill guide" as a template for the length of the bar and the hole locations.
A source of springs in Australia.
Champion C102-32 https://www.championparts.com.au/product/c102-32/ . These are available from a number of suppliers in Australia.
They are 65mm long. I cut mine down to size.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Notes:
The version by cmh can be found here: https://www.thingiverse.com/thing:3220573
I added a photo of a jig I used to calibrate the gauge.
A simple RHS frame to hold a 300Kg crane scale. Uses a length of 10mm threaded rod. A dome head nut with a hole drilled through the center holds the nipple and the spoke head passes through a cut down 10mm bolt with a hole drilled at right angles.
The idea for the calibration jig came from here https://www.youtube.com/watch?v=xgsz7l1GWoI and https://www.thingiverse.com/thing:3322907
Category: Hand Tools