A modification of "Bicycle digital spoke tension meter based on Jobst Brandt design" by cmh
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The only change from the version by cmh, is I have replaced the bar on the back with 20x6mm aluminium bar. I am also…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 28
- Makes
- 0
- Views
- 986
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The only change from the version by cmh, is I have replaced the bar on the back with 20x6mm aluminium bar. I am also not using the 3d printed spring seat. I cut the top of the cap that came with the dial gauge and turned a small seat to sit on top. The overall length is the same as the 3d printed spring seat.
The two halves of the handle and 4 of the pins are glued together with epoxy.
Use the "Drill guide" as a template for the length of the bar and the hole locations.
A source of springs in Australia.
Champion C102-32 https://www.championparts.com.au/product/c102-32/ . These are available from a number of suppliers in Australia.
They are 65mm long. I cut mine down to size.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Notes:
The version by cmh can be found here: https://www.thingiverse.com/thing:3220573
I added a photo of a jig I used to calibrate the gauge.
A simple RHS frame to hold a 300Kg crane scale. Uses a length of 10mm threaded rod. A dome head nut with a hole drilled through the center holds the nipple and the spoke head passes through a cut down 10mm bolt with a hole drilled at right angles.
The idea for the calibration jig came from here https://www.youtube.com/watch?v=xgsz7l1GWoI and https://www.thingiverse.com/thing:3322907
Category: Hand Tools